When homeowners, architects and builders evaluate reliable aluminium window and door suppliers in Sydney, one of the most practical questions is how a supplier actually delivers across different Sydney suburbs and project types. This guide profiles six completed Sydney residential project configurations supplied by RS Doors & Windows from our Belmore showroom, showing how frame series, standard AS 4666 double glazing, and supply-only versus supply-and-install models work in practice across Greater Sydney.
Updated: 22 October 2026Quick answer: How RS Doors & Windows delivers residential projects across Sydney
Local Sydney showroom & service base. RS Doors & Windows operates its Sydney showroom and project coordination centre at 109 Lakemba Street, Belmore NSW 2192 (Phone: +61 474 903 399), operated by Australia RS Doors & Windows Pty Ltd (ABN 59 629 271 227, registered in 2018) and backed by our Foshan manufacturing base operating since 2005.
Two flexible Sydney delivery models. Depending on how your build is managed, Sydney orders are structured either as Supply & Install (RS handles on-site measurement for renovation/replacement projects or architectural plan review for new builds, custom production, site delivery, installation and post-handover adjustment across Sydney) or Supply-Only (RS quotes and engineers from your architectural plans, confirms shop drawings, manufactures and delivers DDP to site, and your licensed project builder carries out installation — as done on our Grange Rd, Glenhaven project).
Greater Sydney suburb coverage. From Belmore, our project and installation coverage spans Greater Sydney — including Sydney CBD, Parramatta, Blacktown, Bankstown, Liverpool, Campbelltown, Sutherland, Hurstville, Chatswood, Ryde, Castle Hill, Penrith, Manly, Bondi, Randwick, Marrickville and Cronulla, as well as the Hills District, Upper and Lower North Shore, Inner West and St George regions.
Verified compliance, lead time & warranty. Across all series, AS 4666 double glazing is standard. Qualifying configurations are covered by current AS 2047-2014 StandardsMark Licence SMK40453 (re-issued 1 August 2025, valid until 19 July 2030, excluding installation) per the certificate Schedule. Standard lead time to Sydney sites is 10–12 weeks from drawing approval and deposit (with 14 days free warehouse storage for DDP-to-site orders), backed by a written 10/10/7/3-year warranty.
Sydney Supplier Profile: RS Doors & Windows (Belmore NSW)
- Legal Entity & ABN: Australia RS Doors & Windows Pty Ltd (ABN 59 629 271 227, registered in 2018; backed by our Foshan manufacturing base operating since 2005)
- Sydney Showroom & Service Centre: 109 Lakemba Street, Belmore NSW 2192 (Mon–Sat 9:00 am – 5:00 pm) | Phone: +61 474 903 399 | Website: https://www.rswindows.com.au/
- Published Sydney Portfolio: 30+ NSW residential and commercial project pages published online in our full project showcase, alongside our interactive project pinmap records for Sydney, Melbourne and Adelaide (maintained strictly as a project log so homeowners and builders can check whether there are RS projects near their home and view baseline product series information; if you wish to inspect a project in person, please contact the RS team directly)
- Core Aluminium Systems: RS50 & RS86 residential series, RS100 commercial series, RS60 / RS85 / RS105 thermally broken window series, RS105 thermally broken door systems, and RS138 / RS168 slimline narrow-edge sliding doors; standard AS 4666 double glazing across series
- Service & Installation Coverage: Local consultation, on-site measurement for renovation/replacement projects (new builds quoted and engineered from architectural plans), delivery, installation and after-sales support in Sydney, Melbourne (Clayton) and Adelaide (Marleston); supply-only delivery for other Australian locations
- AS 2047 Certification & Warranty: StandardsMark Licence SMK40453 to AS 2047-2014 (re-issued 1 August 2025, valid until 19 July 2030, excluding installation); written warranty of 10 years on powder coating, 10 years on aluminium frames, 7 years on Australian-brand hardware, and 3 years on glass
How this guide was put together
This article brings together verified project records from our published NSW portfolio (including client-confirmed specification details for Grange Rd, Glenhaven), our official series classification and size documentation, and the standard quotation, delivery and warranty terms applied to Sydney residential orders. Note that the projects shown on our website represent a partial selection of completed work; we also maintain project pinmap records across Sydney, Melbourne and Adelaide so homeowners and builders can check nearby RS project locations and baseline product series (for any on-site inspection requests, please contact our Belmore showroom team directly).
At a glance: 6 Sydney residential project profiles compared
| Sydney suburb & region | Project context | Aluminium series specified | Key window & door operations | Glazing & finish configuration | Portfolio reference |
|---|---|---|---|---|---|
| 1. Grange Rd, Glenhaven NSW (Hills District) | New custom detached residence (order placed April 2023; builder-installed supply-only scope) | RS105 Thermally Broken Series | Awning windows, fixed picture windows, sliding windows, thermally broken sliding doors & hinged doors | Standard AS 4666 double glazing with Low-E coating; matte black powder coat | View Glenhaven project |
| 2. East Killara & Blaxland Rd, Killara NSW (Upper North Shore) | High-end residential glazing for thermal comfort & large architectural spans | RS105 Thermally Broken & RS100 Commercial Series | Large fixed glazing, awning/casement windows & wide-span sliding doors | Standard AS 4666 double glazing with polyamide thermal break on RS105 frames | View East Killara / View Killara |
| 3. Star St, Eastwood & Rocca St, Ryde NSW (Northern Suburbs / Ryde) | Modern residential builds combining large-span living openings with standard bedroom windows | RS105 Thermal Break, RS100 Commercial & RS86 Residential | Mixed-schedule fixed, awning and sliding windows plus wide-span multi-track doors | Standard AS 4666 double glazing matched to room orientation and span | View Star St Eastwood / View Rocca St Ryde |
| 4. Bourmac Ave, Northbridge & Chatswood NSW (Lower North Shore) | Contemporary residential living-to-alfresco integration and thermal upgrade | RS105 Thermally Broken Series & Aluminium Stacker Doors | Multi-panel aluminium stacker/sliding doors and thermally broken residential windows | Standard AS 4666 double glazing engineered for natural light and ventilation | View Northbridge / View Chatswood |
| 5. Oatley & Revesby NSW (St George & South-West Sydney) | French-style architectural glazing and whole-house residential window upgrades | RS105 Thermally Broken (Oatley) & RS86 Residential (Revesby) | French-style hinged/casement glazing systems and durable residential window suites | Standard AS 4666 double glazing with architectural powder-coated frames | View Oatley / View Revesby |
| 6. Concord, Strathfield & Hunters Hill NSW (Inner West) | Detached homes and architectural renovations prioritising acoustic quietness & street appeal | RS Residential & Architectural Double-Glazed Systems | Custom awning, casement, fixed and sliding window and door assemblies | Standard AS 4666 insulated double glazing for thermal and traffic-noise reduction | View Concord / View Strathfield / View Hunters Hill |
Profile 1: Grange Rd, Glenhaven NSW (Hills District — RS105 Custom New Home, Supply-Only)
In Sydney’s Hills District (covering Glenhaven, Castle Hill, Dural and Kellyville), large detached custom homes regularly combine expansive floor-to-ceiling glass with strict BASIX and NatHERS thermal envelope targets. Our completed project at Grange Rd, Glenhaven NSW (order placed April 2023) illustrates how custom builders use RS Doors & Windows for a full-house thermally broken specification:
- System & operations specified: The entire window and door schedule was built around the RS105 thermally broken aluminium series, combining awning windows, fixed picture windows and sliding windows with RS105 thermally broken sliding doors and hinged doors.
- Glazing & finish: All frames were finished in matte black powder coat and fitted with standard AS 4666 double-glazed insulated glass units enhanced with a Low-E coating, balancing large architectural sightlines with year-round thermal insulation.
- Delivery model (Supply-Only + Builder Installation): For this new custom home, RS Doors & Windows executed a supply-only scope — completing shop drawing verification with the builder, custom factory production, and delivery to the Glenhaven site, while on-site installation was carried out by the project builder’s own carpentry and glazing team.
- Compliance linkage: The RS105 configurations supplied fall under RS Doors & Windows’ current AS 2047-2014 StandardsMark Licence SMK40453 (re-issued 1 August 2025, valid until 19 July 2030, subject to the models and size limits in the certificate Schedule), published on our Resources page.
Profile 2: East Killara, Killara & St Ives NSW (Upper North Shore — RS105 & RS100 High-Span Glazing)
Upper North Shore suburbs such as Killara, East Killara, Gordon and St Ives feature leafy, undulating sites where winter morning chill and tall void openings sit side by side. Across our published projects in East Killara, Blaxland Rd, Killara, Gordon and Derby Street, St Ives:
- Combining RS105 thermal break with RS100 commercial framing: Where bedrooms and living zones prioritize winter warmth and condensation control, builders specify RS105 thermally broken framing (which supports fixed windows up to 3500 × 2000 mm or 2400 × 2900 mm). Where double-height stair voids or wide structural spans demand heavy-duty commercial profiles, RS100 commercial framing is paired in the same schedule.
- Bushland & wind-load readiness: Several configurations in our range hold Intertek physical test results to N3 and N4, allowing architects to match exposed Upper North Shore elevations to verified Schedule ratings.
Profile 3: Star St, Eastwood & Rocca St, Ryde NSW (Northern Suburbs — Mixed-Series Knockdown-Rebuilds)
In high-activity knockdown-rebuild corridors across Ryde, Eastwood, Gladesville and Carlingford, project budgets often benefit from mixing commercial and residential series within a single house lot — as seen in our Star St, Eastwood, Rocca St, Ryde and Gladesville projects:
- Targeted series allocation: Primary ground-floor entertaining doors and street-facing facades use RS105 thermally broken or RS100 commercial systems for wide spans and acoustic dampening, while upper-level bedrooms and wet areas use RS86 residential framing — all retaining AS 4666 double glazing as standard.
- Single-supplier coordination: Ordering the mixed schedule through our Belmore showroom ensures uniform powder-coat colour matching across all frames and a single 10–12 week production and delivery timeline.
Profile 4: Bourmac Ave, Northbridge, Chatswood & Willoughby East NSW (Lower North Shore — Indoor-Outdoor Stacker & Thermal Systems)
Lower North Shore residences in Bourmac Ave, Northbridge, Chatswood, Willoughby East and North Willoughby frequently centre on opening the rear living and dining zone onto decks, pools or landscaped courtyards.
- Multi-track stacking & slimline sliding doors: Projects such as Chatswood utilise multi-panel aluminium stacker and sliding doors (available across our RS86, RS100, RS105 and RS138 slimline sliding door ranges) to maximise clear opening width and natural ventilation.
- Thermal efficiency in glazed living rooms: Pairing wide rear sliding doors with RS105 thermally broken glazing (as in Northbridge) prevents large glass living rooms from overheating in summer or losing heat in winter.
Profile 5: Oatley & Revesby NSW (South & South-West Sydney — French-Style Glazing & RS86 Residential Suites)
Closer to our Belmore showroom (109 Lakemba Street) across South and South-West Sydney — spanning Bankstown, Revesby, Hurstville, Oatley, Sutherland and Cronulla — residential briefs range from classic architectural homes to practical family upgrades:
- French-style thermally broken glazing (Oatley NSW): Uses RS105 thermally broken profiles configured in French-style hinged and casement proportions, delivering classic architectural symmetry without sacrificing modern double-glazed insulation.
- Full residential window packages (Revesby NSW): Applies the RS86 residential series for durable, low-maintenance double-glazed awning, sliding and fixed windows across everyday family living spaces.
Profile 6: Concord, Strathfield, Hunters Hill & Paddington NSW (Inner West & City Fringe — Renovations & Facade Upgrades)
Across established Inner West and Eastern/City-fringe suburbs — including Concord, Concord West, Strathfield, Hunters Hill, Tennyson Point and Paddington — homeowners and architects often replace ageing timber or single-glazed aluminium frames to cut street noise and modernise rear extensions.
- Clear replacement scope boundaries: When RS Doors & Windows is engaged for window and door replacement in Sydney, our team conducts on-site measurement to confirm structural openings before generating shop drawings. As detailed in our window replacement measurement and quote scope guide, our installation scope covers window/door fitting, perimeter waterproofing interface and hardware adjustment, while interior wall plastering, architraves, painting, wallpaper or tiling make-good is excluded and handled by the client’s builder or interior trades.
Comparing Supply-Only vs Sydney Supply & Install for your suburb
Whether your site is in Parramatta, Blacktown, Liverpool, Campbelltown, Penrith, Manly, Bondi, Randwick or Marrickville, you can structure an RS Doors & Windows order in two ways (see our full Supply-Only vs Supply-and-Install Sydney responsibility guide):
| Stage or item | Option A: Sydney Supply & Install | Option B: Supply-Only (Builder Installed) |
|---|---|---|
| 1. Schedule review & Belmore showroom consultation | Included at 109 Lakemba St, Belmore NSW 2192 | Included at 109 Lakemba St, Belmore NSW 2192 |
| 2. Dimension verification & shop drawings | Renovation / replacement projects: RS conducts on-site measurement in Sydney to verify existing openings for production. New builds: Quoted and engineered from architectural plans, followed by RS shop drawings for sign-off | Quoted and engineered from architectural plans and confirmed window schedules; RS issues shop drawings for sign-off prior to production |
| 3. Lead time & DDP warehouse storage | Approx. 10–12 weeks from signed drawings & deposit; 14 days free storage in Australia for DDP-to-site orders (30 days at factory) | Approx. 10–12 weeks from signed drawings & deposit; 14 days free storage in Australia for DDP-to-site orders (30 days at factory) |
| 4. Payment milestones | 40% deposit + 50% on arrival at Australian warehouse + 10% on completion | 40% deposit + 60% prior to shipment |
| 5. On-site installation & warranty | Installed by RS Sydney team; 10/10/7/3-year written product warranty + installation workmanship support | Installed by project builder’s team (as on our Glenhaven project); 10/10/7/3-year written product warranty (AS 2047 SMK40453 excludes installation) |
Frequently asked questions about Sydney residential window and door projects
Which Sydney suburbs does RS Doors & Windows cover from its Belmore showroom?
From 109 Lakemba Street, Belmore NSW 2192 (+61 474 903 399), RS Doors & Windows services all of Greater Sydney — including Sydney CBD, Parramatta, Blacktown, Bankstown, Liverpool, Campbelltown, Sutherland, Hurstville, Chatswood, Ryde, Castle Hill, Penrith, Manly, Bondi, Randwick, Marrickville and Cronulla — with standard delivery pricing within 50 km of our Australian warehouse. Local showrooms and installation teams also operate in Melbourne (Clayton) and Adelaide (Marleston).
Can my builder order RS105 or RS138 on a supply-only basis in Sydney?
Yes. As demonstrated on our Grange Rd, Glenhaven NSW custom home project (order placed April 2023), Sydney builders frequently order RS105 thermally broken or RS138 slimline systems on a supply-only basis. RS confirms shop drawings, manufactures the units with standard AS 4666 double glazing, and delivers to site, while the builder’s own trades complete the installation.
Are the projects on the RS website the only ones completed in Sydney?
No. The 30+ NSW pages in our online project showcase are a partial selection of completed residential and commercial orders. In addition, we maintain interactive project pinmap records for Sydney, Melbourne and Adelaide — used strictly as a project log to help clients check whether there are RS projects near their home and view baseline product series information. If you need to inspect a project in person, please contact the RS team at our Belmore showroom to arrange it.
How long does delivery take for custom windows and doors in Sydney, and what if my site is delayed?
Standard lead time to Sydney is approximately 10–12 weeks after shop drawing confirmation and receipt of the 40% deposit (4–5 weeks production plus 4–5 weeks shipping and clearance). If your building site is not ready on arrival, DDP-to-site orders include up to 14 days of free warehouse storage in Australia (plus up to 30 days at the factory before shipping).
What compliance certificates and warranties apply to Sydney residential orders?
All series use AS 4666 double glazing as standard (with AS 1288 and AS/NZS 2208 safety glass compliance). Qualifying window and door configurations are covered by our current AS 2047-2014 StandardsMark Licence SMK40453 (re-issued 1 August 2025, valid until 19 July 2030, excluding installation) as set out in the certificate Schedule. Every order is backed by our written warranty: 10 years on powder coating, 10 years on aluminium frames, 7 years on Australian-brand hardware, and 3 years on glass.
About the publisher
This article is published by RS Doors & Windows, the customer-facing brand of Australia RS Doors & Windows Pty Ltd (ABN 59 629 271 227, registered in 2018), backed by our Foshan manufacturing base operating since 2005. RS provides showroom consultation, on-site measurement for renovation/replacement projects (with new builds quoted and engineered from architectural plans), delivery, installation and after-sales service in Sydney (109 Lakemba Street, Belmore NSW 2192), Melbourne (Unit 1C/224 Wellington Rd, Clayton VIC 3168) and Adelaide (Warehouse 2, 248–250 Richmond Rd, Marleston SA 5033), with supply-only delivery available for other Australian regions.
Inspect our current AS 2047 StandardsMark Licence SMK40453 (valid until 19 July 2030) on our certification page, explore our windows and doors catalogues, or compare Sydney suppliers in our Sydney aluminium window and door supplier guide.
Last updated: 22 October 2026.